Description
SCHNEIDER ELECTRIC
LC1D12G7
CONTACTOR
TESYS-034924
POWER SUPPLY: 120V 50/60HZ
5,5KW/400V 7,5HP/480V
LTH: 25A UI: 690V UIMP: 6KV
CONT.CURRENT: 25A
AWG 10-18 CU 75°C
MAX SHORT CIRCUIT CURRENT RMS RATING:
5KA, 600V WHEN PROTECTED BY K-5 CIRCUIT BREAKER
AUXILIARY CONTACTS: A600-P600
MADE IN FRANCE
The Schneider Electric LC1D12G7 (LC1D12, TESYS-034924) is a contactor used with PLC and HMI control equipment on board. Its coil runs on 120V 50/60Hz, and it is rated 5.5 kW at 400 V or 7.5 HP at 480 V, with 25 A thermal and continuous current, 690 V insulation voltage and 6 kV impulse withstand. In service it connects and disconnects a power circuit whenever the control system energises its coil, letting automation outputs command motor loads. Its auxiliary contacts carry the A600-P600 rating. Offered as New Open Box.
Key Features
✓ 120V 50/60Hz coil supply
✓ 5.5 kW at 400 V, 7.5 HP at 480 V
✓ Ith 25 A, Ui 690 V, Uimp 6 kV
✓ 25 A continuous current, AWG 10-18 Cu 75°C
✓ A600-P600 auxiliary contacts
Marine Applications
✓ Motor control for cooling water and lube oil pumps
✓ Compressor start circuits governed by PLC logic
✓ Galley and accommodation fan motor switching
✓ Automation panel outputs driving auxiliary machinery
Technical Support
Prota Marine provides technical support, repair and onboard installation for the contactor and the wider PLC & HMI system. We assist with fault diagnosis on coil, contact and control circuit problems, and support commissioning of the panel after work is complete.
