Description
PMA
KS42-1
UNIVERSAL LOOP TEMPERATURE CONTROLLER
KS42-110-0000E-000
VER: 2.8
90-250V AC
7,0 VA
THE UNIVERSAL TEMPERATURE CONTROLLER KS 42-1 IS INTENDED FOR UNIVERSAL, PRECISE, AND COST-EFFECTIVE CONTROL TASKS IN ALL BRANCHES OF INDUSTRY. FOR THIS, THE UNIT PROVIDES SIMPLE 2-POINT (ON/OFF) CONTROL, CONTINUOUS PID CONTROL, OR 3-POINT STEPPING CONTROL. THE PROCESS VALUE SIGNAL IS CONNECTED VIA A UNIVERSAL INPUT. A SUPPLEMENTARY ANALOG INPUT CAN BE USED FOR HEATING CURRENT MEASUREMENT OR AS AN EXTERNAL SETPOINT INPUT.
THE KS 42-1 HAS THREE PROCESS OUTPUTS THAT CAN BE 3 RELAYS OR 2 RELAYS PLUS A UNIVERSAL OUTPUT. THIS UNIVERSAL OUTPUT CAN BE USED FOR OPERATING A SOLID-STATE RELAY, A CONTINUOUS CURRENT/VOLTAGE OUTPUT OR TO ENERGISE A TWO-WIRE TRANSMITTER.
THIS CONTROLLER IS PARTICULARLY WELL SUITED TO THE FOLLOWING INDUSTRY APPLICATIONS:
FURNACES AND OVENS
BURNERS AND BOILERS
PLASTICS PROCESSING
DRIERS
MADE IN GERMANY
The PMA KS42-1 (KS42-110-0000E-000, VER 2.8) is a universal temperature controller for shipboard control systems, holding a process temperature by switching or modulating heating equipment. It offers 2-point on/off, continuous PID or 3-point stepping control, reading the process value through a universal input, with a supplementary analog input for heating current measurement or an external setpoint. Its three process outputs can be three relays or two relays plus a universal output for a solid-state relay, a continuous current or voltage signal, or a two-wire transmitter supply. It runs on 90-250 V AC at 7,0 VA and is offered in used condition.
Key Features
✓ 2-point, PID or 3-point stepping control
✓ Universal process value input
✓ Supplementary analog input for heating current or external setpoint
✓ Three process outputs: 3 relays or 2 relays plus universal output
✓ 90-250V AC supply, 7,0 VA
Marine Applications
✓ Auxiliary boiler and burner temperature control
✓ Fuel oil heater outlet temperature control
✓ Galley oven temperature control
✓ Drier and tank heating control
Technical Support
Prota Marine provides technical support, repair and onboard installation for the temperature controller and the wider marine control system. Support covers fault diagnosis on inputs, outputs and control behaviour, and commissioning of the controller with the heater or burner it serves.
