Description
LAE
MODEL: AC1-27TS2RE-B
TEMPERATURE CONTROLLER
POWER SUPPLY: 230V ~ ±10% 50/60HZ 3W
INPUT: PTC -50÷150°C (COD. ST1…)
OUTPUT 1: 16(4)A OUTPUT 2: 16(4)A (COD. SN4…)
W16 16
FEATURES:
RUNS ON MAINS POWER SUPPLY
PID WITH AUTOTUNING OR ON/OFF CONTROL
MAIN OUTPUT ON 12A RELAY OR FOR SSR-PILOTING AND AUXILIARY OUTPUT ON 5A RELAY
INPUT FOR 0÷1V, 0/4÷20MA, PTC/NTC10K, TC J/K OR PT100 0.1 / 1°C OR 1°F RESOLUTION
SELECTABLE REFRIGERATING/HEATING (DEHUMIDIFYING/ HUMIDIFYING) CONTROL
ABSOLUTE OR RELATIVE TEMPERATURE ALARMS
ON/OFF BUTTON ON FRONT
LOAD START LIMITATION AND SAFETY OPERATION IN CASE OF PROBE FAILURE QUICK PROGRAMMING THROUGH ZOT-AC1
KEY CONNECTION TO LAE TAB SUPERVISORY SYSTEMS
TECHNICAL SPECIFICATION:
INPUT TYPE: PTC NTC10K°
RANGE: -50°C÷150°C -40°C÷125°C
ACCURACY: ±3°C ±3°C
RESOLUTION: 0.1/1°C/1°F
AMBIENT TEMPERATURE: -10÷50°C
MADE IN ITALY
The Laetus Argus AC1-27TS2RE-B is a 230 V AC temperature controller for marine control system duties, regulating heating or refrigerating loads from a probe input. It runs on mains at 230 V ±10%, 50/60 Hz, 3 W, takes a PTC input over -50 to 150°C, and has two outputs rated 16(4) A. Control can be PID with autotuning or on/off, with selectable refrigerating or heating mode, absolute or relative temperature alarms and safety operation if the probe fails. A front on/off button is fitted, and programming can be done quickly through the ZOT-AC1. It comes in New Open Box condition, made in Italy.
Key Features
✓ PID with autotuning or on/off control
✓ PTC input, -50 to 150°C, 0.1/1°C or 1°F resolution
✓ Two outputs rated 16(4) A
✓ Selectable refrigerating or heating control
✓ Absolute or relative temperature alarms with probe-failure safety operation
Marine Applications
✓ Provision cold room temperature control
✓ Galley and accommodation heating loads
✓ Dehumidifying and humidifying control in equipment rooms
✓ Refrigerated store temperature alarms
Technical Support
Prota Marine provides technical support, repair and onboard installation for the temperature controller and the wider marine control system. We help with fault diagnosis on the controller, probe and output wiring, and support commissioning of the refrigeration or heating circuit it controls.
