Description
DECKMA HAMBURG GMBH
OMD-24/2008
MEASURING CELL
ART.NO.: 77500
TYPE: DVZ-1804G2F300Y
FLOW METER
PART# 16700
Q: 0,5-4,5 L/MIN
PMAX: 10 BAR
TMAX: 80C
IP65
SOLENOID VALVE
WWC W24MS
125690
PRA
179763 W23MS
604527
GERMANY
The Deckma Hamburg OMD-24/2008 measuring cell (77500) is an assembly for the bilge alarm monitor system, supplied with a DVZ-1804G2F300Y flow meter (16700) and a solenoid valve. The measuring cell is where the oil content of the sample water is determined, the flow meter indicates sample flow across a 0,5-4,5 L/min range, and the solenoid valve opens and closes the water feed. The flow meter is rated for 10 bar and 80°C maximum, with IP65 protection. Together these parts make up the sampling and measuring section of the bilge alarm. The assembly is in New Without Box condition.
Key Features
✓ OMD-24/2008 measuring cell, article number 77500
✓ DVZ-1804G2F300Y flow meter, part 16700
✓ Flow range Q 0,5-4,5 L/min
✓ Pmax 10 bar, Tmax 80°C, IP65
✓ Solenoid valve marked WWC W24MS 125690 and PRA 179763 W23MS 604527
Marine Applications
✓ Oil content measurement in bilge alarm monitors
✓ OMD-24/2008 measuring section overhaul
✓ Oily water separator discharge supervision
✓ Sample flow control in bilge water monitoring
Technical Support
Prota Marine provides technical support, repair and onboard installation for the measuring cell and the wider bilge alarm monitor system. We assist with fault diagnosis across the cell, flow meter and solenoid valve, and with commissioning once the assembly is fitted on board.
