Description
TRAFAG
TYPE: 973.2374.931
PRESSURE SWITCH
RANGE: -0,6…3,4 BAR / -0,06…0.34 MPA
PMAX.: 12 BAR/ 1,2 MPA
250V AC 10(3)A 24V DC 2A
IP65
-30T70
SWITZERLAND
The Trafag 973.2374.931 is a pressure switch used in marine control systems to open or close an electrical circuit in response to pressure in a monitored line. Its working range runs from -0.6 to 3.4 bar (-0.06 to 0.34 MPa), reaching slightly below atmospheric pressure, and it withstands a maximum of 12 bar. The contacts are rated 250 V AC 10(3) A and 24 V DC 2 A, so the switch can drive alarm or control signals within the plant. It has IP65 protection and was made in Switzerland. It is supplied new without box.
Key Features
✓ Range -0.6 to 3.4 bar (-0.06 to 0.34 MPa)
✓ Maximum pressure 12 bar (1.2 MPa)
✓ Contact rating 250 V AC 10(3) A
✓ Contact rating 24 V DC 2 A
✓ IP65 protection, temperature marking -30T70
Marine Applications
✓ Low lubricating oil pressure alarms on auxiliary engines
✓ Cooling water pump pressure monitoring
✓ Standby pump cut-in on low-pressure lube oil circuits
✓ Vacuum and low-pressure monitoring on fresh water generators
Technical Support
Prota Marine provides technical support, repair and onboard installation for the pressure switch and the wider marine control system. Support covers fault diagnosis of the switch and its connected circuits, along with commissioning support after installation.



