Description
SCHNEIDER ELECTRIC
LC1D65A
TESYS
3 POLE CONTACTOR
ITH: 80A UI:690V-50/60HZ UIMP: 6KV
IEC/EN 60947-4-1
POWER SUPPLY: 440V AC 65A
600V A.C. MAX.
CONT.CURRENT: 80A CU 75°C WIRE ONLY
AUXILIARY CONTACTS: A600-P600
MADE IN INDONESIA
The Schneider Electric TeSys LC1D65A is a 3 pole contactor with an 80A thermal current rating, used in shipboard PLC and HMI control equipment. It is the switching element between the automation system and a three-phase power circuit, opening and closing the main poles on command from the control side. Its ratings include an insulation voltage of 690V at 50/60 Hz, an impulse withstand of 6 kV, a 440V AC rating at 65A and conformity to IEC/EN 60947-4-1. Auxiliary contacts are rated A600-P600. It is supplied in New Open Box condition.
Key Features
✓ TeSys 3 pole contactor, part number LC1D65A
✓ Thermal current (Ith) 80A, continuous current 80A with Cu 75°C wire only
✓ Rated insulation voltage 690V at 50/60 Hz, impulse withstand 6 kV
✓ 440V AC 65A rating, 600V AC maximum
✓ Auxiliary contacts rated A600-P600, built to IEC/EN 60947-4-1
Marine Applications
✓ PLC-controlled starter panels for engine room pumps
✓ Ventilation fan motor control in automation cabinets
✓ Compressor start circuits in machinery control systems
✓ Switching three-phase loads from HMI-operated control panels
Technical Support
Prota Marine provides technical support, repair and onboard installation for the 3 pole contactor and the wider PLC and HMI system. Our engineers carry out fault diagnosis on contactor and control panel circuits and provide commissioning support once the unit is installed onboard.




