Description
PEPPERL+FUCHS
TYPE: KHD2-WAC-EX 1.P
TRANSFORMER ISOLATED STRAIN GAUGE AMPLIFIER
PART NO.: 71621
K-SERIES
MAX AMBIENT TEMPERATURE: 60℃
CURRENT MONITORING TERMINALS 17,18
UM=250V TERMINALS 23,24 & POWER RAIL CONNECTOR
UN=40V TERMINALS 23,24 & POWER RAIL CONNECTOR
U MAX OUT 17.6V TERMINALS 1,2,3,7,8,9
I MAX OUT 314MA TERMINALS 1,2,3,7,8,9
MADE IN ENGLAND
The Pepperl+Fuchs KHD2-WAC-EX 1.P (part no. 71621) is a transformer isolated strain gauge amplifier from the K-Series range. It belongs to the shipboard control system, where it amplifies strain gauge signals with transformer isolation for the monitoring and control equipment. Current monitoring is available on terminals 17 and 18, and output limits of 17.6 V and 314 mA apply on terminals 1, 2, 3, 7, 8 and 9. The module is rated for a maximum ambient temperature of 60°C and was made in England. It is supplied in used condition.
Key Features
✓ Transformer isolated strain gauge amplifier
✓ Maximum ambient temperature 60°C
✓ Current monitoring on terminals 17 and 18
✓ Um 250 V and Un 40 V on terminals 23, 24 and power rail connector
✓ U max out 17.6 V and I max out 314 mA on terminals 1, 2, 3, 7, 8, 9
Marine Applications
✓ Strain gauge signal amplification in shipboard control cabinets
✓ Isolated strain gauge inputs to the vessel’s monitoring and control system
✓ K-Series isolator and amplifier installations in automation panels
Technical Support
Prota Marine provides technical support, repair and onboard installation for the strain gauge amplifier and the wider marine control system. Our engineers help with fault diagnosis on the amplifier and its connected circuits, and give commissioning support once the module is back in service.



