Description
HOPPE BORD-MESSTECHNIK
HCG2011 MO4 P1
PRESSURE SENSOR
OUTPUT: 4…20 MA 2-WIRE
NOM. RANGE: 2500 MBAR REL
5B PS
0/250MBARREL
LI 6/13
1814799_10 / 214238
HCG2011 M04 P1
B5-EB-00037-Z_12.00
STAINLESS STEEL SENSOR CABLE
112145
L=5,2M
BATCH: 147110
800001193403
GERMANY
Marked 5B PS, the Hoppe HCG2011 MO4 P1 is a pressure sensor for the marine control system. It comes with a B5-EB-00037-Z_12.00 stainless steel sensor cable 5,2 m long. It measures relative pressure and transmits the value as a 4-20 mA signal on a two-wire connection to the vessel’s monitoring hardware. The nominal range is 2500 mbar rel, and this unit has a set range of 0/250 mbar rel. It was manufactured in Germany. Condition is New Without Box.
Key Features
✓ Set range 0/250 mbar rel, marked 5B PS
✓ Nominal range 2500 mbar rel
✓ 4-20 mA output, 2-wire
✓ Paired B5-EB-00037-Z_12.00 stainless steel sensor cable
✓ 5,2 m cable, manufactured in Germany
Marine Applications
✓ Low-range relative pressure inputs to the monitoring hardware
✓ 4-20 mA transmitter channels in the vessel control system
✓ Pressure points shown on automation and alarm displays
Technical Support
Prota Marine provides technical support, repair and onboard installation for the pressure sensor and the wider marine control system. Fault diagnosis covers the sensor, cable and connected input, and commissioning support is available when the unit is put into operation.



