Description
HOPPE BORD-MESSTECHNIK
HCG2011 MO4 P1
PRESSURE SENSOR
OUTPUT: 4…20 MA 2-WIRE
NOM. RANGE: 2500 MBAR REL
29A
0/1000MBARREL
LI 6/6
1814799_10 / 214299
HCG2011 M04 P1
B5-EB-00037-Z_12.00
STAINLESS STEEL SENSOR CABLE
112145
L=5,2M
BATCH: 147110
800001193403
GERMANY
The Hoppe HCG2011 MO4 P1 pressure sensor, marked 29A, comes with its B5-EB-00037-Z_12.00 stainless steel sensor cable. It is part of the marine control system, where it converts relative pressure at its measuring point into a 4-20 mA two-wire signal for the vessel’s monitoring and control equipment. The unit has a nominal range of 2500 mbar rel and is set to 0/1000 mbar rel. The cable is 5,2 m long. It is made in Germany and offered in New Without Box condition.
Key Features
✓ 4-20 mA output on a two-wire connection
✓ Nominal range of 2500 mbar rel
✓ Set range of 0/1000 mbar rel, tagged 29A
✓ B5-EB-00037-Z_12.00 stainless steel sensor cable
✓ 5,2 m cable length, made in Germany
Marine Applications
✓ Relative pressure input to the alarm and monitoring system
✓ Analogue 4-20 mA channels on automation input modules
✓ Pressure measuring points wired into the ship’s control network
Technical Support
Prota Marine provides technical support, repair and onboard installation for the pressure sensor and the wider marine control system. Our engineers assist with fault diagnosis on the sensor and its signal circuit, and give commissioning support when the unit is brought into service.



