Description
HOPPE BORD-MESSTECHNIK
HCG2011 MO4 P1
PRESSURE SENSOR
OUTPUT: 4…20 MA 2-WIRE
NOM. RANGE: 2500 MBAR REL
250MBAR-CX
0/250MBARREL
LI 9/18
1814799_40 / 214398
HCG2011 M04 P1
B5-EB-00037-Z_12.00
STAINLESS STEEL SENSOR CABLE
112145
L=5,2M
BATCH: 147110
800001193403
GERMANY
The Hoppe HCG2011 MO4 P1 pressure sensor, identified as 250MBAR-CX, belongs to the vessel’s marine control system and comes with a B5-EB-00037-Z_12.00 stainless steel sensor cable measuring 5.2 m. Its job is to measure relative pressure and report it as a 4-20 mA current on a 2-wire circuit, so the monitoring equipment receives a measured value. Nominal range is 2500 mbar relative, with this sensor designated 0/250 mbar rel. Produced in Germany, it is sold in new without box condition.
Key Features
✓ 2-wire 4-20 mA output signal
✓ 2500 mbar relative nominal range
✓ Designation 250MBAR-CX, 0/250 mbar rel
✓ B5-EB-00037-Z_12.00 stainless steel sensor cable
✓ 5.2 m cable length, made in Germany
Marine Applications
✓ Relative pressure inputs for engine room alarm monitoring
✓ Analogue sensor channels on ship control and monitoring systems
✓ Low-pressure measuring points within machinery control
Technical Support
Prota Marine provides technical support, repair and onboard installation for the pressure sensor and the wider marine control system. Support covers fault diagnosis of the sensor and its cable, and commissioning assistance when the unit is put into service.



