Description
HOPPE BORD-MESSTECHNIK
HCG2011 M04 P1
PRESSURE SENSOR
OUTPUT: 4…20 MA 2-WIRE
NOM. RANGE: 2500 MBAR REL
3B SB
0/250MBARREL
LI 6/10
1814799_10 / 213034
HCG2011 MO4 P1
B5-EB-00037-Z_12.00
STAINLESS STEEL SENSOR CABLE
112145
L=5,2M
BATCH: 147110
800001193403
GERMANY
Made in Germany, the Hoppe HCG2011 M04 P1 (tagged 3B SB) is a pressure sensor for shipboard control and monitoring, here paired with a 5.2 m B5-EB-00037-Z_12.00 stainless steel sensor cable. Within the marine control system it acts as a measuring point, sending relative pressure as a 2-wire 4-20 mA current signal for the alarm and monitoring equipment. The sensor has a nominal range of 2500 mbar relative and is designated 0/250 mbar rel. Condition is new without box.
Key Features
✓ Pressure sensor with 2-wire 4-20 mA output
✓ Nominal range 2500 mbar relative
✓ Designated 0/250 mbar rel, tag 3B SB
✓ Stainless steel sensor cable B5-EB-00037-Z_12.00
✓ Cable length 5.2 m
Marine Applications
✓ Low-range relative pressure points on the ship’s control system
✓ Current-loop inputs to alarm and monitoring cabinets
✓ Pressure indication for engine room monitoring
Technical Support
Prota Marine provides technical support, repair and onboard installation for the pressure sensor and the wider marine control system. Our engineers handle fault diagnosis where a measuring point shows no signal or abnormal values, and provide commissioning support when the sensor is brought into service.



