Description
HOPPE BORD-MESSTECHNIK
HCG2011 MO4 P1
PRESSURE SENSOR
OUTPUT: 4…20 MA 2-WIRE
NOM. RANGE: 2500 MBAR REL
1 F
0/1600MBARREL
LI 9/2
1814799_10 / 214259
HCG2011 M04 P1
B5-EB-00037-Z_12.00
STAINLESS STEEL SENSOR CABLE
112145
L=5,2M
BATCH: 147110
800001193403
GERMANY
The Hoppe Bord-Messtechnik HCG2011 MO4 P1 is a pressure sensor delivered with its B5-EB-00037-Z_12.00 stainless steel sensor cable, in New Without Box condition. It forms part of the vessel’s control and monitoring system, turning relative pressure at its measuring point into a 4-20 mA two-wire signal for the control equipment. The sensor carries a nominal range of 2500 mbar rel and is marked 0/1600 mbar rel with the tag 1 F. The cable has a length of 5.2 m, so the sensor and its lead come as a single assembly.
Key Features
✓ 4-20 mA two-wire output
✓ Nominal range 2500 mbar rel
✓ Marked 0/1600 mbar rel, tag 1 F
✓ B5-EB-00037-Z_12.00 stainless steel sensor cable
✓ 5.2 m cable length
Marine Applications
✓ Relative pressure measurement feeding the vessel’s control system
✓ 4-20 mA analogue inputs on alarm and monitoring panels
✓ Low-range pressure points measured in mbar
✓ Sensor and cable assemblies at remote measuring points
Technical Support
Prota Marine provides technical support, repair and onboard installation for the pressure sensor and the wider marine control system. Our engineers assist with fault diagnosis on the sensor, its cable and the 4-20 mA signal path, and with commissioning once the unit is in place.



