Description
HOPPE BORD-MESSTECHNIK
HOMIP-IFC-514
DISPLAY
MAT.NO.: F-02497-14003
ETH0-MAC: 00-17-CF-00-19-FC
ETH1-MAC: 00-17-CF-00-19-FD
IMCA GMBH
RAD8-01C
ANALOG INPUT BOARD
V0.5
PHOENIX CONTACT
UM 45-D25SUB/S
INTERFACE MODULE
NO. 2962793
CH.NO.: 3004767854
UNITRONIC LIHCH
U202 LAPP KABEL
The Hoppe HOMIP-IFC-514 (Mat. No. F-02497-14003) is a display unit supplied as an assembly with an Imca GmbH RAD8-01C analog input board, version V0.5, and a Phoenix Contact UM 45-D25SUB/S interface module, No. 2962793. It belongs to the vessel’s marine control system. The display shows information from the connected equipment, and the analog input board takes in signals for it. The unit has two Ethernet interfaces, ETH0 and ETH1, and a Lapp Kabel Unitronic LiHCH U202 cable is part of the set. The assembly is offered in used condition.
Key Features
✓ HOMIP-IFC-514 display, Mat. No. F-02497-14003
✓ Two Ethernet interfaces, ETH0 and ETH1
✓ Imca GmbH RAD8-01C analog input board, V0.5
✓ Phoenix Contact UM 45-D25SUB/S interface module, No. 2962793
✓ Lapp Kabel Unitronic LiHCH U202 cable
Marine Applications
✓ Display of measured values at onboard control stations
✓ Analog signal acquisition from shipboard measuring points
✓ Ethernet-linked display within onboard measurement networks
Technical Support
Prota Marine provides technical support, repair and onboard installation for the display assembly and the wider marine control system. Our engineers handle fault diagnosis on the display, analog input board and interface module, and provide commissioning support when the unit goes back into service.



