Description
HOPPE BORD-MESSTECHNIK
HCG2011 MO4 P1
PRESSURE SENSOR
OUTPUT: 4…20 MA 2-WIRE
NOM. RANGE: 2500 MBAR REL
26 SB
0/600MBARREL
LI 6/4
1814799_10 / 214227
HCG2011 M04 P1
B5-EB-00037-Z_12.00
STAINLESS STEEL SENSOR CABLE
112145
L=5,2M
BATCH: 147110
800001193403
GERMANY
Carrying the point marking 26 SB, the Hoppe HCG2011 MO4 P1 is a pressure sensor built with a B5-EB-00037-Z_12.00 stainless steel sensor cable. It serves the vessel’s control and monitoring equipment as the measuring element at its location, sending relative pressure as a two-wire 4-20 mA output. The sensor’s nominal range is 2500 mbar rel, and it is set for 0/600 mbar rel. The cable length is marked as 5.2 m. This unit is listed as New Without Box.
Key Features
✓ 4-20 mA output over two wires
✓ 2500 mbar rel nominal range
✓ 0/600 mbar rel set range
✓ Stainless steel sensor cable B5-EB-00037-Z_12.00, 5.2 m
✓ Marked 26 SB, LI 6/4
Marine Applications
✓ Low-range relative pressure points in the ship control system
✓ Analog feeds to centralised alarm and monitoring stations
✓ Two-wire sensor loops wired to control system input cards
Technical Support
Prota Marine provides technical support, repair and onboard installation for the HCG2011 MO4 P1 pressure sensor and the wider marine control system. Our team assists with fault diagnosis and gives commissioning support when the sensor is brought into service.



