Description
HOPPE BORD-MESSTECHNIK
HCG2011 MO4 P1
PRESSURE SENSOR
OUTPUT: 4…20 MA 2-WIRE
NOM. RANGE: 2500 MBAR REL
6B SB
0/600MBARREL
LI 6/16
1814799_10 / 214278
HCG2011 M04 P1
B5-EB-00037-Z_12.00
STAINLESS STEEL SENSOR CABLE
112145
L=5,2M
BATCH: 147110
800001193403
GERMANY
The Hoppe HCG2011 MO4 P1 pressure sensor, marked 6B SB, is a relative pressure transmitter delivered with a B5-EB-00037-Z_12.00 stainless steel sensor cable. It forms part of the vessel’s control and monitoring plant, where it turns the pressure at its measuring point into a 4-20 mA two-wire signal for the control electronics. The sensor has a nominal range of 2500 mbar rel and is set to a working range of 0/600 mbar rel. The attached cable is marked with a length of 5.2 m. The unit is offered in New Without Box condition.
Key Features
✓ 4-20 mA two-wire output
✓ Nominal range 2500 mbar rel
✓ Set range 0/600 mbar rel
✓ B5-EB-00037-Z_12.00 stainless steel sensor cable, 5.2 m
✓ Point marking 6B SB, made in Germany
Marine Applications
✓ Analog pressure inputs to the ship control and monitoring system
✓ Low-pressure measuring points within a 0/600 mbar rel band
✓ Two-wire 4-20 mA loops feeding alarm and monitoring panels
Technical Support
Prota Marine provides technical support, repair and onboard installation for the HCG2011 MO4 P1 pressure sensor and the wider marine control system. Our engineers handle fault diagnosis on the sensor and its signal loop, and offer commissioning support once the unit is fitted.



