Description
HOPPE BORD-MESSTECHNIK
HCG2011 M04 P1
PRESSURE SENSOR
OUTPUT: 4…20 MA 2-WIRE
NOM.RANGE: 2500 MBAR REL
3A PS
0/1200 -MBARREL
LI 9/114
1814799_10 / 213020
HCG2011 MO4 P1
B5-EB-00037-Z_12.00
STAINLESS STEEL SENSOR CABLE
112145
BATCH: 1477110
800001193403
L=5,2 M
GERMANY
The Hoppe Bord-Messtechnik HCG2011 M04 P1 is a 3A PS pressure sensor for monitoring and control systems on board, supplied with a B5-EB-00037-Z_12.00 stainless steel sensor cable 5.2 m long. It has a nominal range of 2500 mbar relative, with 0/1200 mbar relative also specified, and delivers a 2-wire 4-20 mA signal to the automation system. Built in Germany, it gives the control system a pressure input from the point where it is installed. The condition is New Without Box.
Key Features
✓ 4-20 mA 2-wire output
✓ Nominal range 2500 mbar relative
✓ 0/1200 mbar relative specified
✓ B5-EB-00037-Z_12.00 stainless steel sensor cable
✓ Cable length 5.2 m
Marine Applications
✓ Tank pressure and level inputs for the ship automation system
✓ Draught and trim measurement installations
✓ Pressure monitoring points in ballast and service tank systems
Technical Support
Prota Marine provides technical support, repair and onboard installation for the HCG2011 M04 P1 pressure sensor and the wider marine control system. Support covers fault diagnosis on the sensor and its stainless steel cable, along with commissioning support when the signal is brought into the automation system.



