Description
DANFOSS
MBC 5100 1411-1DB04
PRESSURE CONTROL SWITCH
NO.: 061B000266
RANGE: -0.2…10 BAR
PE.: -0.02…1 MPA
PB/MWP: 15 BAR
BAR ~ KP/CM² ~ KGF/CM²
AC 15 : 0.5A 250V
DC 13 : 12W 125V
EN 60947-5
IP65
MADE IN POLAND
The Danfoss MBC 5100 1411-1DB04 (061B000266) is a pressure control switch used in shipboard control systems, where it switches an electrical circuit in response to the pressure it senses. Its range runs from -0.2 to 10 bar (-0.02 to 1 MPa), and the maximum working pressure is 15 bar. Contact ratings are AC 15: 0.5 A at 250 V and DC 13: 12 W at 125 V, and the enclosure is rated IP65. The switch is built to EN 60947-5 and was made in Poland. It is supplied new without box.
Key Features
✓ Pressure range -0.2 to 10 bar (-0.02 to 1 MPa)
✓ Maximum working pressure 15 bar
✓ Contact rating AC 15: 0.5 A, 250 V
✓ Contact rating DC 13: 12 W, 125 V
✓ IP65 enclosure, built to EN 60947-5
Marine Applications
✓ Lubricating oil pressure switching on auxiliary machinery
✓ Compressed air line pressure control
✓ Cooling water pump start and stop circuits
✓ Low-pressure alarm contacts in fuel oil systems
Technical Support
Prota Marine provides technical support, repair and onboard installation for the pressure control switch and the wider marine control system. Our engineers assist with fault diagnosis on switching circuits and with commissioning once the unit is installed.




