Description
BENDER
A-ISOMETER
IREH470Y2-613
INSULATION MONITORING DEVICE
ART.NO.: B91078002
SOFTWARE VERSION: D44 V1.21
RESPONSE VALUE: RAN=0,1…2M OHM/0,5…10M OHM
RATED VOLTAGE: UN= AC 0…793V 50…400HZ
SUPPLY VOLTAGE: US= AC 90…132V 50/60HZ
POWER CONSUMPTION: 3,0VA
RELAY CONTACTS: AC 250V 5A
The Bender A-Isometer IREH470Y2-613, article number B91078002, is an insulation monitoring device serving the vessel’s marine control system and the AC supply it supervises. It runs software D44 V1.21 and offers two response ranges, 0.1-2 MΩ and 0.5-10 MΩ, for AC networks rated 0-793 V at 50-400 Hz. The device draws 3.0 VA from a 90-132 V AC supply and has relay contacts rated 250 V AC, 5 A. It is supplied in used condition.
Key Features
✓ Response value 0.1-2 MΩ / 0.5-10 MΩ
✓ Rated network voltage AC 0-793 V, 50-400 Hz
✓ Supply voltage AC 90-132 V, 50/60 Hz
✓ Relay contacts rated AC 250 V, 5 A
✓ Software version D44 V1.21, power consumption 3.0 VA
Marine Applications
✓ Insulation monitoring on shipboard AC distribution up to 793 V
✓ Insulation supervision on 400 Hz shipboard supplies
✓ Insulation supervision of main switchboard busbars
Technical Support
Prota Marine provides technical support, repair and onboard installation for the insulation monitoring device and the wider marine control system. Fault diagnosis on A-Isometer units and commissioning support on board are both part of the service.



