Description
OPTO22
SNAP-UP1-ADS
ULTIMATE I/O PROCESSOR TCP/IP TRANSPORT
10 BASE-T / 100 BASE-TX
TA = 70°C T4(135°C)
TECHNICAL SPECIFICATIONS:
POWER REQUIREMENTS: 5.0 VDC TO 5.2 VDC AT 1.2 A MAXIMUM (DOES NOT INCLUDE MODULE POWER REQUIREMENTS)
PROCESSOR: 32-BIT COLDFIRE 5407
MEMORY: 16 MB, 512 KB, 8 MB
TOTAL RAM
BATTERY-BACKED RAM
FLASH EEPROM
BACKUP BATTERY: CR2032, FIXED (NOT USER REPLACEABLE)
NETWORK INTERFACE: IEEE 802.3 NETWORK, 10BASE-T AND 100BASE-TX
SERIAL PORT: RS-232
SERIAL DATA RATES: DEFAULT IS 19,200 BAUD; BAUD RATE IS SOFT-SELECTABLE FROM 150 TO 115,200 BAUD.
MAXIMUM ETHERNET SEGMENT LENGTH: 100 METERS WITH CATEGORY 5 OR SUPERIOR UTP.
FOR 100 MBPS AT THIS DISTANCE, USE CATEGORY 5 OR SUPERIOR SOLID
UTP.
JUMPERS (INTERNAL): BOOT TO KERNEL/BOOT TO LOADER
RESET TO FACTORY DEFAULTS
TEMPERATURE: 0 °C TO 70 °C, -40 °C TO 85 °C
OPERATING
STORAGE
HUMIDITY: 0–95% HUMIDITY, NON-CONDENSING
The Opto 22 SNAP-UP1-ADS is an Ultimate I/O processor with TCP/IP transport. Within a marine control system it acts as the processing and communication point for I/O, running on a 32-bit ColdFire 5407 processor and connecting over 10BASE-T or 100BASE-TX Ethernet. An RS-232 serial port is also provided, with data rates soft-selectable from 150 to 115,200 baud. Memory comprises 16 MB total RAM, 512 KB battery-backed RAM and 8 MB flash EEPROM. It draws 5.0 to 5.2 V DC at 1.2 A maximum, excluding module power, and is offered in New Open Box condition.
Key Features
✓ 32-bit ColdFire 5407 processor
✓ 10BASE-T / 100BASE-TX Ethernet with TCP/IP transport
✓ RS-232 port, 150 to 115,200 baud
✓ 16 MB RAM, 512 KB battery-backed RAM, 8 MB flash EEPROM
✓ 0 to 70°C operating, 0-95% RH non-condensing
Marine Applications
✓ Ethernet I/O processing in machinery automation panels
✓ Networked I/O for alarm and monitoring systems
✓ TCP/IP data exchange between engine room I/O and control stations
✓ RS-232 link to local service terminals
Technical Support
Prota Marine provides technical support, repair and onboard installation for the I/O processor and the wider marine control system. We assist with fault diagnosis on network and serial communication and provide commissioning support when the processor is brought back into service.
