Description
SCHNEIDER ELECTRIC
LC1D50AF7
3 POLE CONTACTOR WITH EVERLINK TERMINALS
TESYS-940865
POWER SUPPLY: 440V-50A-110V AC COIL 50/60HZ
LTH: 80A UI:690V-50/60HZ UIMP: 6KV
IEC/IEN 60947-4-1
600V A.C.MAX.
CONT.CURRENT: 70A CU 75°C WIRE ONLY
AUX.CONT: A600-P600
MADE IN INDONESIA
The Schneider Electric LC1D50AF7 is a 3-pole contactor with Everlink terminals from the TeSys range, working with PLC and HMI control equipment to switch power circuits on command. Its 110 V AC coil, suited to 50/60 Hz, lets a control signal close the main poles, which are rated 440 V and 50 A, with a conventional thermal current of 80 A and 70 A continuous current. Rated insulation voltage is 690 V and impulse withstand is 6 kV, to IEC/IEN 60947-4-1. It was made in Indonesia and is offered in New Open Box condition.
Key Features
✓ Main rating 440 V, 50 A with 110 V AC coil, 50/60 Hz
✓ Lth 80 A, continuous current 70 A
✓ Ui 690 V, Uimp 6 kV, 600 V AC maximum
✓ Auxiliary contact rating A600-P600
✓ Everlink terminals for copper 75°C wire only, IEC/IEN 60947-4-1
Marine Applications
✓ Starter panels for seawater and fresh water cooling pumps
✓ PLC-controlled ventilation fan motor circuits
✓ Compressor motor switching in engine room control panels
✓ Fuel and lube oil transfer pump starters
Technical Support
Prota Marine provides technical support, repair and onboard installation for the 3-pole contactor and the wider PLC and HMI system. Support covers fault diagnosis of coil, contact and control circuit problems, along with commissioning support for the starter or panel it serves.
