Description

BENDER
LINETRAXX
RCM420-D-2
RESIDUAL CURRENT MONITORRCM420
ART.NR: B74014002
SOFTWARE: D240 V1.10
INSULATION MONITORING CONTROLLER
RESPONSE VALUE:
IAN= AC 10 MA…10 A 42…2000Hz
SUPPLY VOLTAGE: US= AC/DC 70…300V
POWER CONSUMPTION: 2,5 VA
RELAY CONTACTS: AC 250 V 5 A
MADE IN GERMANY

The Bender RCM420-D-2 Linetraxx (B74014002, software D240 V1.10) is a residual current monitor for the electrical distribution side of the vessel’s control equipment, where it keeps watch on earth leakage in switchboard and consumer circuits. Its response value range runs from AC 10 mA to 10 A over 42 to 2000 Hz, and it provides relay contacts rated AC 250 V 5 A. The unit accepts an AC/DC 70 to 300 V supply and draws 2.5 VA. It is also marked as an insulation monitoring controller and was made in Germany. Condition is Used.

Key Features

✓ Response value AC 10 mA to 10 A, 42 to 2000 Hz

✓ Supply voltage AC/DC 70 to 300 V

✓ Power consumption 2.5 VA

✓ Relay contacts rated AC 250 V 5 A

✓ Software D240 V1.10, made in Germany

Marine Applications

✓ Earth leakage monitoring on main switchboard feeders

✓ Residual current supervision of galley and accommodation circuits

✓ Leakage monitoring on pump and fan motor circuits

✓ Insulation fault alarms on distribution boards

Technical Support

Prota Marine provides technical support, repair and onboard installation for the residual current monitor and the wider marine control system. Fault diagnosis on leakage alarms and the associated distribution circuits is available, along with commissioning support after the unit is connected.