Description
SELCO
M4700
ALARM INDICATOR PANEL
M4700-00
24VDC
THE ALARM INDICATOR M4700 PROVIDE FLUSH MOUNTED LED BASED INDICATION WITH 20 CHANNELS. EACH CHANNEL CAN BE USED TO INDICATE THE STATE OF ONE POTENTIAL FREE CONTACT.
ALL SELCO INDICATOR UNITS ARE AVAILABLE WITH EITHER NEGATIVE OR POSITIVE REFERENCE. AN INSERT PAPER LABEL PROVIDES THE OPPORTUNITY TO PRINT A DESCRIPTION OR INSTRUCTION RIGHT NEXT TO THE RELATED CHANNEL LED. THE SELCO INDICATOR UNITS ARE AVAILABLE FOR BOTH DC OF AC SUPPLY. INPUT SIGNALS CAN BE +24 VDC, +48 VDC OR +110 VDC.
THE INDICATOR PANEL IS ALSO EQUIPPED WITH AN ALARM RELAY, A SIREN RELAY AND A BUILT-IN SIREN.
A TEST PUSH BUTTON LOCATED ON THE FRONT WILL, WHILE ACTIVATED, IGNITE ALL LEDS TO CONFIRM PROPER OPERATION. AN AUXILIARY PUSH BUTTON IS PROVIDED FOR APPLICATION DEPENDANT USE. THE AUXILIARY PUSH BUTTON IS DIRECTLY CONNECTED TO THE PLUG-IN TERMINALS ON THE REAR SIDE OF THE UNIT.
The Selco M4700 (M4700-00) is a 24 V DC alarm indicator panel for shipboard control and alarm systems, giving flush-mounted LED indication across 20 channels. Each channel shows the state of one potential-free contact, and an insert paper label lets a description sit beside every LED. An alarm relay, a siren relay and a built-in siren handle the audible and relayed side of an alarm, while a front test push button lights all LEDs to confirm operation. An auxiliary push button wired to the rear plug-in terminals is left for application-specific use. This panel is in used condition.
Key Features
✓ 20-channel flush-mounted LED indication
✓ Each channel indicates one potential-free contact
✓ Alarm relay, siren relay and built-in siren
✓ Test push button lights all LEDs
✓ Auxiliary push button to rear plug-in terminals
Marine Applications
✓ Engine room alarm group indication at the control console
✓ Bridge indication of machinery or tank level alarms
✓ Local alarm panel for steering gear or purifier room
✓ Status display for pump and fan running contacts
Technical Support
Prota Marine provides technical support, repair and onboard installation for the alarm indicator panel and the wider marine control system. Our engineers assist with fault diagnosis on channel inputs, relays and the siren, and with commissioning once the panel is wired in.



