Description
DWYER INSTRUMENTS,INC.
CAT.NO: 1910-1
DIFFERENTIAL PRESSURE SWITCH
MAX. PRESSURE: 45 IN W.C.
SURGE PRESSURE: 10 PSI
MAX TEMPERATURE: 82℃
USE NO. 14 AWG CU WIRE
RATED 90℃ MIN
MADE IN U.S.A.
The Dwyer Instruments 1910-1 is a differential pressure switch for marine control systems. It compares the pressure at two points and changes its electrical contact state when the difference between them reaches the switching point, giving the control system a simple on/off signal. The unit handles a maximum pressure of 45 in. W.C. and a surge pressure of 10 psi, with a maximum temperature of 82°C. Field wiring calls for No. 14 AWG copper wire rated 90°C minimum. Made in the USA, this switch is supplied in new open box condition.
Key Features
✓ Maximum pressure 45 in. W.C.
✓ Surge pressure 10 psi
✓ Maximum temperature 82°C
✓ Wiring with No. 14 AWG copper wire rated 90°C minimum
✓ Made in the USA
Marine Applications
✓ Airflow monitoring on engine room ventilation fans
✓ Differential pressure sensing across air filters
✓ Combustion air proving on boiler burners
✓ Pressure difference monitoring in HVAC ducting
Technical Support
Prota Marine provides technical support, repair and onboard installation for the differential pressure switch and the wider marine control system. We assist with fault diagnosis when the switch or its circuit misbehaves, and offer commissioning support after installation.
