Description
HITECH INSTRUMENTS
MTL GAS PRODUCTS
MARK II
G1010
OXYGEN ANALYZER
SENSOR: N TYPE
BUILD: 813-9050 / 5
GAS & DISPLAY RANGE: O2 100PPM TO 50%
O/P TYPE: 4 TO 20MA
O/P RANGE: PROGAMMABLE
ALARM: 2X PROG
SUPPLY: 220/240V 50/60HZ 10VA MAX
FUSE: 400MA (F)
ENGLAND
The Hitech Instruments Mark II G1010 is an oxygen analyzer for a ship’s gas detection system, measuring O2 from 100 ppm to 50% with an N type sensor. It presents the reading on its own display and passes it to other equipment through a 4-20 mA output whose range is programmable, while two programmable alarms give warning at chosen oxygen levels. Power comes from a 220/240 V 50/60 Hz supply at 10 VA max, with a 400 mA (F) fuse. The unit carries build 813-9050 / 5 and is supplied new without box.
Key Features
✓ N type sensor
✓ Gas and display range O2 100 ppm to 50%
✓ 4-20 mA output with programmable range
✓ Two programmable alarms
✓ 220/240 V 50/60 Hz supply, 10 VA max
Marine Applications
✓ Oxygen analysis on inert gas and nitrogen generator plant
✓ 4-20 mA oxygen signal to the vessel alarm and monitoring system
✓ Oxygen deficiency monitoring in enclosed spaces
✓ Atmosphere monitoring of cargo and ballast tanks
Technical Support
Prota Marine provides technical support, repair and onboard installation for the oxygen analyzer and the wider gas detection system. We assist with fault diagnosis on the analyzer, its sensor and its output and alarm wiring, and provide commissioning support when the unit is brought into service.
